Dry Film Lubricant for Firearms
Moly Lube Dry Film Firearm Lubricant by Birchwood Casey is a high-performance dry film lubricant engineered specifically for precision firearm maintenance and semi-metallic component protection. Utilizing advanced molybdenum disulfide (MoS2) micro-particles suspended in a fast-drying carrier, this formula establishes an ultra-slippery, low-friction barrier that significantly reduces metal-to-metal contact, mitigating wear and galling in critical firearm mechanisms such as bolt carriers, firing pins, and trigger assemblies.
Optimized for both hunting rifles and tactical firearms, this aerosol lubricant penetrates tight tolerances and forms a durable, dry film that resists accumulation of dust, powder residue, and other contaminants common in field and range environments. Its semi-metallic lubrication properties enhance the longevity of moving parts by maintaining consistent friction coefficients under high pressure and temperature fluctuations typical of repeated firing cycles.
Key Technical Features:
- Dry Film Lubrication Technology: Creates a non-greasy, dry layer that minimizes friction and metal wear without attracting abrasive particles or grime.
- Extreme Pressure Resistance: Maintains lubrication integrity under elevated heat and mechanical stress encountered during rapid firing and extended shooting sessions.
- Precision Aerosol Application: Delivers a controlled, uniform coating to intricate firearm components, ensuring comprehensive coverage without excess buildup.
- Corrosion and Oxidation Protection: Forms a protective barrier against moisture and corrosive elements, preserving metal surfaces and preventing rust formation.
- Versatile Use: Suitable for firearms with semi-metallic parts, including airguns and precision shooting equipment where oil-based lubricants are contraindicated.
Recommended Usage Instructions:
- Safety First: Confirm the firearm is completely unloaded and handle in a secure, well-ventilated area before maintenance.
- Surface Preparation: Thoroughly clean all metal surfaces to remove residual oils, carbon fouling, and particulate matter for optimal adhesion.
- Application Method: Shake the aerosol can vigorously to homogenize the molybdenum disulfide suspension. Spray a thin, even coat approximately 6 inches (15 cm) from the target surfaces, focusing on high-friction contact points.
- Curing Time: Allow the lubricant to dry fully, forming a solid film. Drying duration varies with ambient temperature and humidity but typically completes within minutes.
- Routine Maintenance: Inspect lubricated areas regularly during shooting sessions or after exposure to harsh environments. Reapply as necessary to maintain optimal lubrication and protection.
Product Specifications:
- Net Weight: 9.5 ounces (approximately 269 grams)
- Part Number: 40140
- UPC Code: 029057401400
The Moly Lube Dry Film Firearm Lubricant is an indispensable asset for hunters, competitive shooters, and firearm enthusiasts seeking advanced lubrication solutions that extend the operational lifespan of semi-metallic firearm components. Its specialized dry film formula ensures smooth cycling, reduces mechanical wear, and maintains firearm reliability under the demanding conditions of hunting, tactical deployment, and precision shooting disciplines.
Moly Lubricant 9.5 oz. for Reloading and Shooting - Casey
C40140
Dry Film Lubricant for Firearms
Moly Lube Dry Film Firearm Lubricant by Birchwood Casey is a high-performance dry film lubricant engineered specifically for precision firearm maintenance and semi-metallic component protection. Utilizing advanced molybdenum disulfide (MoS2) micro-particles suspended in a fast-drying carrier, this formula establishes an ultra-slippery, low-friction barrier that significantly reduces metal-to-metal contact, mitigating wear and galling in critical firearm mechanisms such as bolt carriers, firing pins, and trigger assemblies.
Optimized for both hunting rifles and tactical firearms, this aerosol lubricant penetrates tight tolerances and forms a durable, dry film that resists accumulation of dust, powder residue, and other contaminants common in field and range environments. Its semi-metallic lubrication properties enhance the longevity of moving parts by maintaining consistent friction coefficients under high pressure and temperature fluctuations typical of repeated firing cycles.
Key Technical Features:
- Dry Film Lubrication Technology: Creates a non-greasy, dry layer that minimizes friction and metal wear without attracting abrasive particles or grime.
- Extreme Pressure Resistance: Maintains lubrication integrity under elevated heat and mechanical stress encountered during rapid firing and extended shooting sessions.
- Precision Aerosol Application: Delivers a controlled, uniform coating to intricate firearm components, ensuring comprehensive coverage without excess buildup.
- Corrosion and Oxidation Protection: Forms a protective barrier against moisture and corrosive elements, preserving metal surfaces and preventing rust formation.
- Versatile Use: Suitable for firearms with semi-metallic parts, including airguns and precision shooting equipment where oil-based lubricants are contraindicated.
Recommended Usage Instructions:
- Safety First: Confirm the firearm is completely unloaded and handle in a secure, well-ventilated area before maintenance.
- Surface Preparation: Thoroughly clean all metal surfaces to remove residual oils, carbon fouling, and particulate matter for optimal adhesion.
- Application Method: Shake the aerosol can vigorously to homogenize the molybdenum disulfide suspension. Spray a thin, even coat approximately 6 inches (15 cm) from the target surfaces, focusing on high-friction contact points.
- Curing Time: Allow the lubricant to dry fully, forming a solid film. Drying duration varies with ambient temperature and humidity but typically completes within minutes.
- Routine Maintenance: Inspect lubricated areas regularly during shooting sessions or after exposure to harsh environments. Reapply as necessary to maintain optimal lubrication and protection.
Product Specifications:
- Net Weight: 9.5 ounces (approximately 269 grams)
- Part Number: 40140
- UPC Code: 029057401400
The Moly Lube Dry Film Firearm Lubricant is an indispensable asset for hunters, competitive shooters, and firearm enthusiasts seeking advanced lubrication solutions that extend the operational lifespan of semi-metallic firearm components. Its specialized dry film formula ensures smooth cycling, reduces mechanical wear, and maintains firearm reliability under the demanding conditions of hunting, tactical deployment, and precision shooting disciplines.
€17.50
Tax included
Related Products
- Out-of-Stock
- Out-of-Stock
- -15%
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock