.490 Caliber Bullet Mold
90448
LEE 2-Cavity Bullet Mold for .490 Caliber_x000D_
_x000D_
Designed for muzzleloading firearms or hunting cartridge reloading._x000D_
_x000D_
Optimized for high-volume production of cast projectiles._x000D_
_x000D_
Constructed with an aluminum block and steel bushings, featuring corrosion-resistant alignment pins._x000D_
_x000D_
Aluminum molds heat up and cool down faster than iron molds, allowing quicker attainment of optimal casting temperature._x000D_
_x000D_
Weighing one-third less than iron molds, it reduces fatigue during extended casting sessions._x000D_
_x000D_
The two aluminum blocks are securely held with tongs to prevent any movement while pouring molten lead._x000D_
_x000D_
Equipped with an extra-hard anodized sprue plate for precise and clean trimming of cast bullets._x000D_
_x000D_
Projectile weights may vary depending on the alloy used._x000D_
_x000D_
Includes tongs for opening and closing the mold._x000D_
_x000D_
Recommended to thoroughly degrease the mold before use and to season or treat it with a mold-specific product._x000D_
_x000D_
Never lubricate the interior of the mold._x000D_
_x000D_
Lightly lubricate the sprue plate retaining screw for smooth operation.
_x000D_
Designed for muzzleloading firearms or hunting cartridge reloading._x000D_
_x000D_
Optimized for high-volume production of cast projectiles._x000D_
_x000D_
Constructed with an aluminum block and steel bushings, featuring corrosion-resistant alignment pins._x000D_
_x000D_
Aluminum molds heat up and cool down faster than iron molds, allowing quicker attainment of optimal casting temperature._x000D_
_x000D_
Weighing one-third less than iron molds, it reduces fatigue during extended casting sessions._x000D_
_x000D_
The two aluminum blocks are securely held with tongs to prevent any movement while pouring molten lead._x000D_
_x000D_
Equipped with an extra-hard anodized sprue plate for precise and clean trimming of cast bullets._x000D_
_x000D_
Projectile weights may vary depending on the alloy used._x000D_
_x000D_
Includes tongs for opening and closing the mold._x000D_
_x000D_
Recommended to thoroughly degrease the mold before use and to season or treat it with a mold-specific product._x000D_
_x000D_
Never lubricate the interior of the mold._x000D_
_x000D_
Lightly lubricate the sprue plate retaining screw for smooth operation.
€50.52
Tax included